Introduction and contraction rate

Date:2022-7-19 Author:Sam

Commonly used Plastic Introduction and contraction rate
\u0026 nbsp;
ABS proportion: 1.05 pumping rate of 5 thousandths is the material that can connect the product size accuracy. Generally, it is used for products with high accuracy. For example, ABS+PC is a common material for mobile phone cases [123 ] \u0026 nbsp;
POM’s pumping rate of 20-25 is high -wear and strength, such as commonly used materials for plastic gear \u0026 nbsp;

PS PS Five of the water pumping rate can be used for transparent materials, but it is relatively crispy, but the price is self -made \u0026 nbsp;

PP material proportion of 0.91 can float on the water, and the water pump rate is 16-20 commonly used On the shell with low size requirements (it is resistant to fall!) \u0026 nbsp;

HIPS proportion: 1.05 water pumping rate 5th is commonly used to replace ABS, but the intensity is the strength, but the strength is intensity, but the intensity is the strength, but the strength is intensity, but the strength is intensity, but the strength is intensity, but the strength is intensity, but the strength is intensity, No more than ABS \u0026 nbsp;

MBS (that is, transparent ABS) each parameter is the same as ABS, but it is more crispy than ABS \u0026 nbsp;

PC material pumping rate 5-7 thousandths, high intensity, and high temperature resistance material. It is one of the high -priced plastics \u0026 nbsp;

PPS is one of the high -temperature resistance materials. [123 ] \u0026 nbsp;
PVC’s pumping rate of 10-25, can also be used for transparent materials, easy aging, and self -control, because the requirements for security regulations are becoming more and more stricter, now [ 123] PMMA
Generally use non -toxic PVC to make products \u0026 nbsp;

PMMA, also known as organic glass, high transparent function, good light guide, but easy to scrape. \u0026 nbsp; PA pumping rate of 8-14 has good abrasion resistance, high toughness
\u0026 nbsp;
PE pumping rate 20-25, commonly used in
blowstorm
, can also be used for soft gear (muffin gear)

[ 123] PMMA (Aceri): 5/1000, POM (Steel): 20/1000
\u0026 nbsp;

PS (PS (Hard glue): 5/1000, PP (100 % off glue): 16/1000
PC (bulletproof glue): 5/1000, ABS (ultra -fragmented): 5/1000 \u0026 nbsp; HIPS (non -fragmented): 5/1000, as (transparent trivial gum): 5/1000
\u0026 nbsp;
GPPS: 5/1000, PBT: 15/1000
\u0026 nbsp;
PA66 (nylon): 16/1000, PA6 (nylon): 9/1000 TPR
(soft glue): 18/1000, TPU (wear -resistant soft gum ) 18/1000
TPV
(high temperature resistance soft gum): 15-25/1000 (soft 2.5%, hard 1.5%)
PE: ( Soft glue) 20/1000, KVA (rubber gum): 20/1000 \u0026 nbsp;
GP (hard glue): 5/1000, CA (acid gum): 5/1000
\u0026 nbsp ;
Kraton (kraton): 20/1000, acetal (AC): 20/1000 \u0026 nbsp;
PU: 20/1000, PVC (soft): 20/1000 \u0026 nbsp;
PC+ABS: 5/1000, BDS (K-Resin0)/K material: 7/1000 PA66+50%GPT: 2/1000, PA66+30%GPT : 3/1000 \u0026 nbsp;
PA66+15%GPT: 8/1000, PBT+30%GPT: 3/1000 PP+20%GPT: 5/1000, PP+30 30 %GPT: 3/1000
\u0026 nbsp;



The plastic is actually opened Model shrinking rate
Plastic name: ABS, actual mold opening and pumping rate: 0.0045, type of mold opening production: print case
Plastic name: ABS, ABS, Actual mold opening pumping rate: 0.005, type of mold opening production: mobile phone case
Plastic name: PP, actual mold opening pump rate: 0.015, type of production production type: Midea electric kettle
Plastic name: ABS, actual mold opening water rate: 0.005, type -opened production type: beautiful dispenser Plastic name: PP, actual mold opening and pumping rate: 0.0155, type of mold opening type: Honda car shell
Plastic name: PA+30%GF, actual mold opening water rate: 0.013,, 0.013,, 0.013,, 0.013, Types of mold opening production: Zongshen motorcycle accessories
Plastic name: PS, actual model opening pumping rate: 0.005, type opening production type: Toshiba, Hua Ling freezer drawer

Plastic name : H-PE, actual mold opening pumping rate: 0.018, type of mold opening production: Midea electric kettle

Plastic name: ABS, actual mold opening pump rate: 0.005, type-opened production type: beautiful dispenser machine

Plastic name: PP, actual mold opening and pumping rate: 0.0155, type of mold opening production: Honda car shell




Plastic name: PP , Actual mold opening and pumping rate: 0.016, type of mold opening production: kitchen supplies

Plastic name: EVA, actual model opening pump rate: 0.025, type of mold opening production: kitchen supplies

Plastic name: SAN, actual model opening pumping rate: 0.004, type of mold opening production: kitchen supplies

Plastic name: POM, actual mold opening pumping rate: 0.025, type of mold opening type: kitchen supplies [123 [123 ]
Plastic name: ABS, actual mold opening pumping rate: 0.005, model type production type: kitchen supplies

Plastic name: ABS, actual mold opening water rate: 0.003, type of mold opening production: Keycuff
Plastic name: PPR, actual mold opening pump rate: 0.017, type of mold opening production: water pipe joint
Plastic name: POM, actual mold opening water Production type: fire ring

Plastic name: PP, actual mold opening pumping rate: 0.018, model -opening production type: tray

Plastic name: ABS, actual mold opening water rate: 0.005, type of mold opening production: case

Plastic name: as, actual mold opening pumping rate: 0.004, type of mold opening type: case

Plastic name: PA66+30% GF, actual mold opening pump rate: 0.005, type of mold -opening type: 办 g g [

Plastic name: PP, actual mold opening pump rate: 0.016, type of mold opening type: car accessories (reflective light (reflective light (reflective light Mirror)

Plastic name: PA+30%GF, actual mold opening and pumping rate: 0.0035, type of mold -opening type: car accessories (reflector)

Plastic name: ABS+PA,, ABS+PA, Actual mold opening and pumping rate: 0.007, type of mold opening production: car accessories (reflector)

Plastic name: PVC, realInter -mold pumping rate: 0.025, type of mold opening production: automobile accessories

Plastic name: ABS+PC, actual mold opening pump rate: 0.004, type of mold opening type: mobile phone surface cover cover [123 ]
Plastic name: PC, actual mold opening pumping rate: 0.005, type of mold opening production: mobile phone decoration parts

Plastic name: TPU, actual mold opening pump rate: 0.010, mold opening production type Type: mobile phone plug USB interface plug

Plastic name: PA+30%GF, actual mold opening pump rate: 0.007, power plug inner frame.

Plastic name: PBT+30%GF, actual mold opening pump rate: 0.005, power plug inner frame

Plastic name Type: Mobile phone lens

Plastic name: HIPS, actual mold opening pumping rate: 0.0045, model type production type: Philips remote control lower cover

Plastic name: HIPS, actual mold opening pump rate rate : 0.005, type of mold opening production: Philips remote control cover

Plastic name: HIPS, actual mold opening pump rate: 0.0045, type of mold opening type: Philips remote control battery cover

Plastic name: POM, actual mold opening pumping rate: 0.02, type of mold opening production: Siemens a certain accessories (supporting parts)

Plastic name: PA66+NPG25, actual mold opening water rate: 0.0045, opening mold opening Production type: Simonzi a certain accessory (square cover, many inner surfaces)

Plastic name: PP, actual mold opening and pumping rate: 0.018, type of mold opening type: medical basin for medical category

Plastic name: ABS, actual mold opening and pumping rate: 0.0045, type of mold opening production: Samsung remote control lower cover

Plastic name Type: Samsung remote control electric upper cover

Plastic name: HIPS, actual mold opening and pumping rate: 0.0045, type of mold opening production type: Samsung remote control battery cover

Plastic name: HIPS, actual actual Modeling pumping rate
LSNH Cable ExtRusion Line
: 0.0045, type of mold opening production: LG remote control lower cover

Plastic name: HIPS, actual mold opening pump rate: 0.005, mold opening production production Type type: LG remote control on the cover

Plastic name: HIPS, actual mold opening and pumping rate: 0.0045, type of mold opening type: LG remote control battery cover

Plastic name: HIPS, actual actual Model pumping rate: 0.005, the type of mold opening production: Yamaha motorcycle speaker

Plastic name: POM, actual mold opening pump rate: 0.025, type of mold opening production: Plastic gear

Plastic name: PVC, actual mold opening pump rate: 0.03, type opening production type: password box handle handle handles

Plastic name: ABS, actual mold opening and pumping rate: 0.005, type of mold opening production: car accessories
Plastic name: PP, actual mold opening water rate: 0.025, mold opening production type Type: Password Box
Plastic name: PC, actual mold opening pump rate: 0.0055, type of mold opening type: car accessories

Plastic name: PA66, actual mold opening water rate: 0.018, opening to open Model type type: lock

Plastic name: POM, actual mold opening pump rate: 0.025, mold opening type type: plastic gear

Plastic name: PVC, actual mold opening pump rate: 0.03, type of mold opening production: password box handle

Plastic name: ABS, actual mold opening pump rate: 0.005, type of mold opening type: car accessories
Plastic name: PP, actual opening of opening, actual opening Model pumping rate: 0.025, the type of mold opening production: password box

Plastic name: PC, actual mold opening pumping rate: 0.0055, type of mold opening type: car accessories

Plastic name: PA66 , Actual mold opening and pumping rate: 0.018, type of mold opening production: lock

Plastic name: POM, actual mold opening pump rate: 0.025, type of mold opening production: plastic gear

Plastic Name: PVC, actual mold opening pumping rate: 0.03, type of mold opening production: password box handle

Plastic name: ABS, actual mold opening pumping rate: 0.005, type of mold opening type: car accessories

Plastic name: PP, actual mold opening and pumping rate: 0.025, type of mold opening production: password box




Plastic name: PC, actual mold opening pumping water Rate: 0.0055, type of mold opening production: car accessories

Plastic name: PA66, actual mold opening and pumping rate: 0.018, type of mold opening production: lock

Plastic name: PS, actually actual Modeling rate: 0.0045, type of mold opening production: printer product

Plastic name: ABS, actual model opening pump rate: 0.0025, type of mold opening production: Weiyida’s son
Work [work [work
Work [work
123] The bracket of the parent machine

Plastic name: PA6+35%GF, actual mold opening and pumping rate: 0.004, type of mold opening production: car accessories (internal efficiency facilities)

The above contraction rate has been collected after several years of practice.Do not span 300mm equal glue thickness and does not span 3mm for reliable (the product size is 0.0005 on the 300mm, the product length, width, and height size is too large.Equivalence is too thick, too thin (below 0.5) and product size must be noticed)






Content source and network